ACS11 Digital Conductivity Sensor
Digital Conductivity Sensor, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution.
- Measure rangeConductivity:0-2000us/cm Temperature:0~50.0℃
- AccuracyConductivity:±1%FS Temperature: ±0.5℃
- Power supply12V or 24V DC
- Communication modeRS485(Modbus RTU)
Digital Conductivity Sensor
-
The characteristics of industrial sewage electrode, can work stably for a long time
-
Built in temperature sensor, real-time temperature compensation
-
RS485 signal output, strong anti-interference ability, the output range of up to 500m
-
Using the standard Modbus RTU (485) communication protocol
-
The operation is simple, the electrode parameters can be achieved by remote settings, remote calibration of electrode
-
24V DC power supply
Digital Conductivity Sensor, adopt electrode measuring method, and realizes the automatic temperature compensation in the interior of the electrodes, Automatic identification of standard solution. Electrode adopt imported composite electrode, high precision, good stability,long lifetime, with rapid response, low maintenance cost, real-time online measurement characters etc.. The electrode using standard Modbus RTU (485) communication protocol, 24V DC power supply, four wire mode can very convenient access to sensor networks.
Technical Parameters
| Product | Digital Conductivity Sensor |
| Model | ACS11 |
| Measure range | k=0.5（0～200mS/cm） |
| Temperature range | 0-60℃/high temp up to 120℃ |
| Accuracy | Conductivity measurement accuracy: 2% |
| Temperature measurement accuracy: ±0.5℃ | |
| Working temperature | 0～80℃ |
| Storage environment | -20～70℃ |
| Ingress protection | IP65 |
| Housing Material | ABS |
| Cable | 5 meters (standard) |
Submitted successfully
